Washing Machine Makes Noise When Spinning

Published on:
This post may contain affiliate links, and we will be compensated if you buy after clicking on our links
Read our review guidelines.

You step into the laundry room, anticipating the soothing hum of your washing machine as it cleans your clothes, but instead, you’re met with a jarring noise that disrupts the peace.

That unsettling racket could be a sign of something gone awry within your machine. Before you jump to conclusions or consider replacing your trusted appliance, there are a few potential causes for washing machine makes noise when spinning that you might want to explore.

Understanding these common noises can help you diagnose the issue and get your laundry routine back on track smoothly.

Common Washing Machine Noises


You might notice various common noises coming from your washing machine during operation. These sounds could include:

  • Vibration or banging noises
  • A squealing sound
  • Metal clanking
  • A grinding noise

Understanding these typical noises can help you identify any potential issues and take the necessary steps to keep your machine running smoothly.

Vibration or banging noise

Experiencing a loud vibration or banging noise during the spin cycle of your washing machine typically indicates an unbalanced load. To address this issue, stop the washer and redistribute the load until it’s balanced. If the noise persists, try placing a piece of 3/4-inch plywood under the washer to ensure both appliances are at equal heights.

Additionally, check the leveling feet to confirm all four are firmly in contact with the floor. For new washers, ensure all shipping bolts, blocks, straps, or pins that stabilize the drum during transport have been removed.

  • Stop and redistribute the load
  • Use a piece of plywood for equal heights
  • Check the leveling feet
  • Remove shipping bolts, blocks, straps, or pins
  • Ensure all four leveling feet are in firm contact with the floor

Squealing sound

Squealing noises from your washing machine may indicate an overloaded load, causing strain on components like the tub bearings, drive belt, and drive pulley. When these parts are under excessive strain due to overloading, they can wear out and produce a high-pitched squeal during the spinning cycle.

To resolve this issue, try reducing the size of your loads to prevent overloading. Inspect the tub bearings, drive belt, and drive pulley for any visible signs of damage or wear.

Metal clanking sound

If your washing machine is emitting a metal clanking sound, it could be a result of various issues such as loose items in the tub or malfunctioning shock absorbers or balance springs.

Here are some possibilities to consider:

  • Objects stuck in the outer tub or drain pump causing the noise.
  • Broken shock absorbers on a front-load washer.
  • Malfunctioning balance springs on a top-load washer.
  • Loose change or items in the inner tub creating the clanking sound.

If the noise is loud, it’s best to schedule a service call to address the issue promptly.

Grinding noise

When your washing machine emits a grinding noise, it could indicate potential issues with the motor coupling, drive pulley, or drum bearings, affecting its performance during the spin cycle.

An occasional grinding noise during the spin cycle is normal, but if you hear it during agitation, the motor coupling in a direct-drive washer may be broken.

In a belt-drive washer, the grinding noise could be due to wear and tear on the drive pulley or drive belt.

Additionally, worn-out drum bearings can also be the source of a grinding sound.

It’s essential to address these issues promptly to prevent further damage to your washing machine and ensure it operates smoothly during each cycle.

How Do I Stop My Washer From Making Noise?

To stop your washer from making noise, start by emptying the drum and cleaning the lint trap.

Check under the seal, adjust the water pressure, and replace the water inlet valve if needed.

Following these steps can help reduce the noise your washer makes during its spin cycle.

Empty the Drum


Clearing out the drum of your washer can help eliminate noise caused by items like buttons or zips banging against the inside. If you’re hearing a rattling sound, the culprit could be pieces of clothing or accessories.

Follow these steps to address the issue:

  • Empty the drum: Remove all items from the washer drum.
  • Check for buttons and zips: Look for any loose buttons or zips that could be causing the noise.
  • Run a cycle on empty: Start a wash cycle without any clothes inside.
  • Listen for the noise: Pay attention to whether the rattling sound persists.
  • Identify the problem: If the noise stops, you’ve likely found the source of the issue.

Clean the Lint Trap


To reduce washing machine noise during spin, consider cleaning the lint trap, especially if rattling persists after emptying the drum of your washer.

If the rattling continues, remove the lint trap (if applicable) and clear out any debris caught inside. Washing the lint trap and its housing with a mild detergent can help remove stubborn dirt and prevent future clogs.

A clogged lint trap can cause unbalance issues during the spin cycle, leading to excessive noise. By troubleshooting and cleaning the lint trap regularly, you may prevent issues with drum bearings, tub bearings, or shock absorbers that could result in a grinding sound.

Additionally, ensuring an appropriate load size can help maintain balance and reduce noise levels during operation.

Check Under the Seal


Check under the seal for any items or lint that may be causing your washer to make noise. Sometimes, small objects or lint stuck underneath the seal can lead to annoying sounds. Here are some steps to help you tackle this issue:

  • Remove any trapped items: Inspect under the seal and remove any objects causing the noise.
  • Clean the area: Wipe down the space under the seal to ensure it’s free of debris.
  • Check the bearing: Ensure the bearing near the tub isn’t worn out and causing a grinding sound.
  • Inspect the water inlet valve: A faulty water inlet valve can result in loud banging noises during the wash cycle.
  • Secure the front panel: A loose front panel can cause the washer to wobble and produce noise.

Adjust the Water Pressure

Source: DIY Pinto

Reducing the water pressure supplying your front load washing machine can often effectively eliminate loud noises during the spin cycle. If your washer is rumbling, it could be due to overload. To address this, check if you’re putting too many clothes in at once.

Banging or grinding sounds might also be caused by high water pressure. To fix this issue, move your washer away from the wall and locate the hot and cold water valves. Then, turn the regulator screw to the left to slightly reduce the water flow.

If the noise persists, it might be best to consult a professional in appliance repair. Remember to also check the lint filter regularly to prevent any blockages that could lead to noisy operation.

Replace the Water Inlet Valve


Consider replacing the water inlet valve in your washing machine to address noisy operation during the spin cycle. If you find the valve is clogged, it’s often more practical to replace it than to clean it. You can easily purchase replacement inlet valves from hardware stores. However, ensure the new valve is compatible with your washer type. Installing the valve can be a fiddly job, so don’t hesitate to seek professional installation if you’re unsure how to do it correctly. Here are some important tips to keep in mind:

  • Cleaning the clogged valve might not solve the noise issue.
  • Hardware stores offer replacement valves for convenience.
  • Professional installation can ensure the valve is correctly installed.
  • Matching the valve to your washer type is crucial.

Don’t overload your washer


To prevent your washer from making excessive noise, ensure you load it according to the recommended capacity guidelines for your specific washer type. Overloading your washing machine can cause it to be loud during the spin cycle. For top-loading washers, the ideal load size is up to 80% of the drum’s capacity.

When the washer is making noise, especially inside the drum while spinning, it may be a sign of overloading. Giving your clothes more room to move around can help fix a noisy cycle. By following these guidelines and not overwhelming the washer with laundry, you can reduce the noise levels during the spin cycle and maintain the machine’s efficiency.

Check your washer feet


Ensure your washer is on level ground and that its feet are properly adjusted to prevent excess noise during operation. If your washing machine is making noise, especially during the spin cycle, it might be due to the feet not being level. Here’s how you can fix it:

  • Check for uneven ground where the washer is placed.
  • Adjust the washer feet to balance the machine.
  • Ensure all feet are firmly planted on the ground.

Balancing the washer will help in having a steady machine. A machine that’s off-balance can lead to unwanted washing machine noises.

Call a Professional


If your washing machine continues to make noise, seeking professional help may be necessary. When dealing with issues like worn-out drum bearings that need to be replaced, it’s best to consult a professional appliance repair service.

To determine if the drum bearings are the source of the noise, try spinning the drum by hand from the back of the machine. If there’s a grinding or rumbling sound, it may indicate a problem with the bearings.

Additionally, ensure the machine is level and make sure to distribute the load evenly to prevent unnecessary strain on the components. Remember, some repairs are best left to the experts to avoid causing further damage.

RELATED: Why Does my Washer Smell

Washing Machine Makes Noise When Spinning – FAQ

Why is my washing machine making loud noises during spin?

There could be several reasons your washing machine is making a loud noise during the spin cycle. One common cause is an unbalanced load or if the clothes are not distributed evenly in the drum. It could also be due to worn-out bearings or a faulty motor to the transmission connection.

What are the possible causes of a noisy spin in my washing machine?

Possible causes of a noisy spin in your washing machine include worn-out components such as bearings or belts, loose parts, or even issues with the motor. Additionally, if the machine isn’t level on the floor, it may cause excess vibration leading to noise.

How can I diagnose why my washer is making loud noises?

If your washing machine is making loud noises, start by checking if the load is distributed evenly in the drum. Make sure the machine is level on the floor and inspect for any loose parts or worn-out components. If the issue persists, it might be best to seek professional washing machine repair services.

Is it common for a top load washer to make loud noises during spin?

Top load washers can sometimes make loud noises during the spin cycle, especially if the load is unbalanced or if the machine is not level on the floor. Regular maintenance and ensuring proper loading of clothes can help prevent excessive noise during spinning.

What are the common causes of a washing machine making loud noises?

Some common causes of a washing machine making loud noises include unbalanced loads, worn-out bearings, loose components, or issues with the motor or transmission. Regularly checking and maintaining your machine can help prevent these issues.

How do I fix a washing machine that makes a loud noise when spinning?

If your washing machine is making a loud noise when spinning, start by checking for any loose parts, ensuring the load is balanced, and verifying if the machine is level on the floor. If the problem persists, consider calling a professional for inspection and repair.

Photo of author


Ira Njoroge

Hey, I’m Ira Njoroge, the founder of MySpaceAffair. Early on in my life, I had a passion to embark on a mission to create a cleaner, and more organized household. With a bachelor's degree in engineering after graduating from the University of Maryland in 2015 and seven years as a General Contractor and professional cleaner, on top of my DIY Enthusiasm. I saw the need for a reliable information source for homeowners. My passion, diligence, experience, and hired professionals confirms the reliability of all the advice given in My Space Affair and I hope to provide you all with reliable and thorough content!