How to Reset Maytag Washer

Published on:
This post may contain affiliate links, and we will be compensated if you buy after clicking on our links
Read our review guidelines.

When the cycle seems stuck and the water won’t drain, it might feel like your Maytag washer is speaking a coded language only it understands.

Fret not, as there are simple steps you can take to reset it. By following a few straightforward methods, you can often resolve the issue without the need for professional intervention.

From unplugging the machine to utilizing specific button sequences, the path to how to reset Maytag washer is within your reach.

Understanding these methods can save you time and frustration, ensuring your laundry routine stays uninterrupted.

Method 1: Disconnecting the Power

www.coolblue.nl

To reset your Maytag washer, start by turning it off through the control panel.

Next, unplug the washer for 3 minutes before plugging it back in and attempting to restart.

If the issue persists, give it a longer break by unplugging it for 10 minutes instead.

Step 1: Turn off the washer using the control panel

Switch off your Maytag washer using the control panel’s power button to preserve the life of the appliance and avoid potential damage. By disconnecting the power source in this manner, you’re taking the first step in resetting your Maytag washer.

This action is crucial as it ensures that the machine is completely turned off before proceeding with the reset process. Simply locate the control panel on your Maytag washer and press the power button to shut down the appliance.

Ensuring the washer is powered off before continuing with the reset process is essential for its effectiveness and to prevent any issues that may arise from incomplete power disconnection.

Step 2: Unplug the washer for 3 minutes

For method 1 of resetting your Maytag washer, unplug the appliance from the wall and allow it to sit disconnected for at least 3 minutes.

This step is crucial to ensure the reset process is effective. By disconnecting the power source, you let the washer reset and allow any residual power to dissipate. Waiting for the full 3 minutes is important, so be patient during this time.

It’s okay to wait a bit longer than 3 minutes, but make sure not to rush and plug the washer back in too soon, as this won’t give it enough time to reset properly. Take this time to ensure the appliance is completely disconnected before proceeding with the next step.

Step 3: Plug the washer back in and try again

After unplugging the Maytag washer for 3 minutes to reset it, simply plug it back in, give it a moment to power on, and press the power button before running a test load to check if the washer issues have been resolved. This step is crucial in the reset process as reconnecting the power allows the washer to restart and potentially clear any glitches.

Once you have turned the washer back on, make sure to run a test load of laundry to ensure that the reset solution has effectively addressed the problem. Remember, this simple action of unplugging and reconnecting the washer can often work wonders in resolving common issues without the need for further troubleshooting.

Step 4: Unplug the washer for 10 minutes if it didn’t work

Wondering how to proceed if unplugging the Maytag washer for 3 minutes didn’t resolve the issue? If the reset method didn’t work, try this extended reset troubleshooting step:

  1. Unplug the washer: Reach behind the unit, unplug it, and set a timer for 10 minutes.
  2. Plug the unit back in: After the 10-minute reset duration, plug the washer back into the power source.
  3. Run a load of laundry: To test if the reset process was successful, run a load of laundry. If the issue persists, it’s time to move onto other troubleshooting methods.

Method 2: Start/Pause

simplyswider.com

If you’re facing an error code on your Maytag washer, follow these simple steps:

First, press pause/cancel twice, then hit start/pause once. This method can help clear any issues and reset your washer for smooth operation.

Give it a try to get your washer back up and running efficiently!

Step 1: Use this method to clear an error code

To clear an error code using Method 2: Start/Pause, follow these simple steps:

  1. Disconnect: Unplug the Maytag washer from the power source to ensure safety during troubleshooting.
  2. Reconnect: After a few minutes, plug the washer back in to reset the control board and clear the error code.
  3. Press Start/Pause: Press the Start/Pause button to resume the cycle and see if the error code has been successfully cleared.

Step 2: Press pause/cancel 2 times

After following the steps to clear an error code with Method 2: Start/Pause, proceed to press the pause/cancel button on the Maytag washer twice to continue troubleshooting.

This quick reset is an essential part of the resetting process for Maytag washers when dealing with washer error codes. Pressing the pause button followed by the cancel button twice helps to clear error codes and initiate the reset process efficiently.

By pressing these buttons consecutively, you’re signaling the washer to reset and reevaluate its functions. This action is a crucial step in the resetting instructions for addressing various issues that may arise during the washer’s operation.

Step 3: Press start/pause once

Press the start/pause button once to proceed with the reset process on your Maytag washer. When addressing an error code, it’s crucial to follow these steps to ensure your washing machine functions properly:

  1. Acknowledge the Error: Take note of the error code displayed on the Maytag washer.
  2. Interpret the Code: Understand what the error message signifies to troubleshoot effectively.
  3. Press Start/Pause: By pressing the start/pause button once, you can initiate the resetting process and clear the error code, preventing potential issues in the future.

Method 3: Lifting and Closing Lid

istockphoto.com

To reset your Maytag washer using the method of lifting and closing the lid, start by unplugging the washer for 1 minute.

Next, lift and close the lid six times within 12 seconds to initiate the reset process.

Step 1: Unplug the washer for 1 minute

For a quick reset of your Maytag washer, start by unplugging it from the wall for a minute. Follow these steps:

  1. Reach behind the washer and unplug it from the power source.
  2. Allow the washer to sit unplugged for 60 seconds to ensure all residual power dissipates.
  3. After the 60 seconds, plug the Maytag washer back into the power source.

This simple process helps in resetting the washer by removing any lingering power and initiating the reset sequence.

Step 2: Lift and close the lid 6 times within 12 seconds

After unplugging your Maytag washer for a minute and plugging it back in, proceed to quickly lift and close the lid 6 times within 12 seconds to reset the motor in the machine. This action is crucial to reset your Maytag washer properly.

Remember to start this process immediately after plugging the washer back in, as you only have a 30-second window to lift and lower the lid for the reset to work.

Step 3: Run a test load of laundry

Run a test load of laundry to ensure your Maytag washer is functioning properly after completing the reset process. Here’s what you should do:

  1. Start the washer with a small load of laundry and select a normal cycle.
  2. Observe the machine as it goes through the different stages such as filling, agitating, draining, and spinning.
  3. Check if the washer completes the cycle without any issues like unusual noises or error codes.

Method 4: Standby Mode

istockphoto.com

To begin resetting your Maytag washer, you must first access the Standby Mode by holding the start/pause button for 3 seconds.

Then, proceed to follow the specific steps outlined to calibrate the Cycle Selector knob correctly.

Make sure to pay close attention to each action to ensure the reset process is completed accurately.

Step 1: Hold the start/pause button for 3 seconds

You can activate the standby mode on your Maytag washer by holding the start/pause button for 3 seconds. This step is crucial to initiate the reset process effectively.

To reset your Maytag washer, follow these instructions:

  1. Press and hold: Locate the start/pause button on your Maytag washer.
  2. Hold for 3 seconds: Press and hold the start/pause button for a full 3 seconds.
  3. Wait for standby mode: After holding the button, you should see the washer entering standby mode.

Completing this step correctly will ensure that your Maytag washer is ready for the next phase of the reset process.

Step 2: Turn the Cycle Selector knob clockwise

After successfully entering standby mode by holding the start/pause button, proceed to turn the Cycle Selector knob clockwise for 1 click, ensuring to wait for 1/2 of a second before proceeding further.

Timing is crucial here. If you go too quickly or too slowly, this method may not be successful. Remember, you can try again if it doesn’t work the first time.

The key is to find the right balance between turning the knob swiftly and pausing for the specified duration. By following this method correctly, you’re setting the stage for the next steps in resetting your Maytag washer effectively.

Step 3: Rotate the knob right 2 times and left once, waiting in between each one

Rotate the cycle selector knob to the right twice and then to the left once, ensuring to pause briefly between each rotation. This step is crucial in the reset process of your Maytag top load washer.

Follow these precise instructions to clear any residual power and complete the reset successfully:

  1. Rotate the cycle selector knob clockwise two times.
  2. Wait for half a second.
  3. Rotate the cycle selector knob counterclockwise once.

Step 4: Turn the knob right for 1 click

To proceed with resetting your Maytag washer, advance the cycle selector knob to the right by one click to enter Standby Mode. When done correctly, all LED display lights (excluding ‘lid locked’) will flash at 1/2 second intervals. If the lights don’t flash as described, return to standby mode and repeat the process.

Entering Standby Mode allows the residual power to dissipate, preparing the washer for the reset process. This step is crucial to ensure that the reset is successful. After turning the knob, observe the flashing lights on the display to confirm that you have entered Standby Mode correctly. This sets the stage for the next step in resetting your Maytag washer.

Step 5: Twist the selection knob to light up “Wash”, “Rinse,” and “Done.”

Twist the selection knob on your Maytag washer until only the ‘Wash,’ ‘Rinse,’ and ‘Done’ LED lights are illuminated. If your washer has a display, it should show ‘13.’

To reset your Maytag washer effectively, follow these steps:

  1. Navigate to specific modes: Use the cycle selector knob to choose the desired washing options from the menu.
  2. Display status: Ensure that only the ‘Wash,’ ‘Rinse,’ and ‘Done’ LED lights are lit up, indicating the standby mode.
  3. Deactivate control lock: At this point, you can proceed to the next steps in the reset process, knowing that the control lock is deactivated.

Step 6: Press Start, then unplug the washer for 10 seconds

To proceed with resetting your Maytag washer in Standby Mode, press the Start button, then unplug the washer for 10 seconds. This action helps to clear out any residual power in the machine.

After waiting for the specified time, plug the washer back in. If the washer doesn’t restart automatically, it indicates a successful reset.

This step is crucial in the reset process as it ensures that the washer is completely powered down before initiating the reset. By unplugging the washer for 10 seconds, you allow for a full discharge of any remaining energy, paving the way for a successful reset when you plug it back in.

Method 5: Coin-Operated Washer

istockphoto.com

To reset your Maytag coin-operated washer:

  1. Unlock the lock box.
  2. Press the “Delicates and Knits” button for 5 seconds.
  3. Run a test load of laundry.

This method can help troubleshoot any issues and get your washer back in working order efficiently. Remember to follow these steps carefully for a successful reset.

Step 1: Unlock the lock box

If the coin-operated washer isn’t functioning properly, the first step is to unlock the lock box using the designated keys. Here’s how to proceed:

  1. Gain Access: Locate the lock box on the washer, usually found near the coin slot. Use the designated keys to open the lock box securely.
  2. Identify Settings: Once the lock box is open, look for the control panel inside. This is where you’ll find the necessary settings for resetting or fixing the washer.
  3. Seek Assistance if Needed: If you aren’t the owner of the washer, make sure to consult with the owner or maintenance personnel before making any changes to the settings.

Step 2: Press the “Delicates and Knits” button for 5 seconds

Press the “Delicates and Knits” button on your Maytag washer for 5 seconds to initiate the resetting process. By doing this, the washer will enter diagnostic mode. During this time, the display may flash, indicating the clearing of all error codes.

Pressing and holding this button helps reset the machine by draining any residual power and preparing it for a fresh start. This step is crucial in resolving issues and preparing the washer for further use. If you encounter persistent problems, this action can often resolve them without the need for a technician.

After completing this process, the washer should be ready for the next steps in the reset process.

Step 3: Run a test load of laundry

Start by loading a test load of laundry into the coin-operated Maytag washer. To run a test load successfully, follow these steps:

  1. Close up the lock box securely before starting the machine.
  2. Restart the washer to ensure the reset process is complete.
  3. If the issue persists, try resetting the machine again. If the problem continues after multiple attempts, it may be time to call in for a service appointment to deactivate any remaining issues.

Frequently Asked Questions: How to Reset Maytag Washer

How do I reset my Maytag washer?

To reset your Maytag washer, you can start by unplugging the appliance from the power source for a few minutes and then plugging it back in. This action can help to clear any error codes or malfunctions that may be affecting the washer. If the issue persists, you can try resetting the washer by following specific instructions from the manufacturer.

What should I do to reset a Maytag washer with an error code?

If your Maytag washing machine displays an error code, try resetting it by turning off the washer, unplugging it for a few minutes, plugging it back in, and then restarting the cycle. If the error persists, consult the user manual to see if there are specific reset instructions for that particular error code.

How can I reset a Maytag top load washer?

To reset your Maytag top load washer, you can unplug the washer, wait for a few minutes, plug it back in, and then restart the appliance. This process can help resolve minor issues and restore the washer to its normal functioning.

Are there any specific steps to reset a newer Maytag washer model?

If you have a newer Maytag washer model, the reset process may involve pressing and holding certain buttons on the control panel or following a sequence of actions to initiate the reset. Refer to the user manual or contact appliance repair experts for guidance on how to reset your specific Maytag washer model.

How do I perform a washer reset if there is no reset button?

If your washing machine does not have a dedicated reset button, you can achieve a reset by disconnecting the power supply, allowing any residual power to dissipate, and then reconnecting the washer. This process can help clear any temporary glitches or errors in the appliance.

Can I reset my Maytag washer to factory settings?

Resetting your Maytag washer to factory settings typically involves a more complex process that may vary based on the model. Consult the user manual or reach out to the manufacturer for detailed instructions on how to restore your washer to its original factory settings.

Photo of author

AUTHOR

Ira Njoroge

Hey, I’m Ira Njoroge, the founder of MySpaceAffair. Early on in my life, I had a passion to embark on a mission to create a cleaner, and more organized household. With a bachelor's degree in engineering after graduating from the University of Maryland in 2015 and seven years as a General Contractor and professional cleaner, on top of my DIY Enthusiasm. I saw the need for a reliable information source for homeowners. My passion, diligence, experience, and hired professionals confirms the reliability of all the advice given in My Space Affair and I hope to provide you all with reliable and thorough content!